Dicyclohexylamine CAS 101-83-7

Comments · 64 Views

CAS:101-83-7
EINECS:202-980-7
InChI:1S/C12H23N/c1-3-7-11(8-4-1)13-12-9-5-2-6-10-12/h11-13H,1-10H2

Dicyclohexylamine CAS 101-83-7

 

Descriptions

Product:Dicyclohexylamine

Synonyms:N,N-Dicyclohexylamine;Perhydrodiphenylamine;DCHA

Molecular Formula:C12H23N

Molecular Weight:181.32

CAS:101-83-7

EINECS:202-980-7

InChI:1S/C12H23N/c1-3-7-11(8-4-1)13-12-9-5-2-6-10-12/h11-13H,1-10H2

 

Physicochemical properties

Melting point:

-2ºC

Boiling point:

256ºC

Water solubility:

1G/L(20ºC)

Refractive index:

1.4832-1.4852

Flash point:

103ºC

Density:

0.912

Properties descriptions:

Colorless transparent oil liquid,pungent ammonia smell,flammable and high toxic. Melting point is about 20℃,Freezing point-2℃,Boiling point 255.8℃(Decomposition),87-93℃(1.73kPa),Relative density0.9103(20、4℃),Refractive index 1.4823,1.4842,Flash point 96℃。Miscible with organic solvents, slightly soluble in water, strongly alkaline.

 

Safety information

Safety descriptions:S26:in case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S45:If you have an accident or feel unwell, go to your doctor for help immediately (preferably with a product container label).

S60:The substance residues and containers must be disposed of as hazardous waste

S61:Avoid discharge of this substance residue into the environment. Refer to special instructions/safety data sheets.

S36/37/39:Wear appropriate protective clothing, gloves and use goggles or face masks.

Dangerous mark:C:Corrosive substance

               N:Environmental hazardous substance

Risk codes:  R22:Harmful if swallowed.

R34:Causes burns

R50/53:Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

UN code :UN2565

MSDS report: Dicyclohexylamine  MSDS report

 

Storage and transport information

It should be sealed and stored in a dry and cool ventilated warehouse

 

Other information

Product application:Used in organic synthesis and as insecticide, acid gas absorbent, steel anti-rust agent.

Production method and others: Dicyclohexylamine was prepared by hydrogenation of aniline at high temperature and high pressure in the presence of catalyst.

Packaging

200KG/ drum storage: It is recommended to store in dry and cool areas and properly ventilated. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene.

 

 

 

Contact Us

SHANGHAI OHANS CO., LTD.

Factory Address :Jining High-tech Development Zone, Shandong, China

Call Center :021-5161-9971

Headquarters :Room a2110, building 55, No. 709, Lingshi Road, Zhabei District, Shanghai

Email Us :[email protected]  [email protected]

 

More:https://www.ohans.com/dicyclohexylamine-cas-101-83-7-pdf/

Comments