central machinery industrial dust collector can only know whether the product quality is good through trial operation. Specifically, Central Machinery Industrial Dustrlector should pay attention to whether the fan, bearings, filter bags and other components work normally when trial running, and pay attention to whether its working temperature and processing air volume are qualified.

After the Central Machinery Industrial Dust Collection is installed and commissioned, there should be a process of trial operation, so as to determine whether the quality of the Central Machinery Industrial Dust Collection is passing. During the trial operation, if there are any problems, the enterprise should check each single component so that there can be a problem with the problematic parts one by one. When the inspection is found that there is no problem, a comprehensive test should be performed to conduct some functions of the Central Machinery Industrial Dust Collection for performance tests.

When conducting a testRal Machinery Industrial Dust Collector test, it is necessary to conduct targeted testing according to the characteristics of Central Machinery Industrial Dust Collector. It is mainly to view whether the host of the host meets the standard after turning on, whether the dust removal effect is good after turning on the power of Central Machinery During the inspection process, some records should be made appropriately to prevent daily needs.

Specifically, the trial operation of Central Machinery Industrial Dust Collection should include the following inspection items:

1. Whether the fan can run normally and whether there is a problem with the bearing vibration.

2. Under the working temperature specified by the Central Machinery Industrial Dust Collector, whether the Central Machinery Industrial Dust Collection is operating normally.

3. In Central Machinery Industrial Dust Collection, whether the temperature of each test site meets the standard, and how the performance of the air volume is processed.

4. Whether the filter bag is installed with loose mouth and other phenomena. After a period of use, it will be seriously affected by the dust resistance and whether the dust will corrode the machine.

5. How long does it take to clear the gray cycle, how the effect of clear gray is, etc.

6. The installation of the dust removal filter bag occurs after use, or whether there is a drop of bags, loose mouths, wear, etc. After use, it can be determined by the discharge of the chimney after the operation.

7. Whether the lodging of the baggage is existed and whether the ash discharge system is unblocked. To prevent blockage and erosion, when the grim of the accumulation of gray will affect the production of the host.

8. Adjustment of the ash clearance cycle and the time clearance time, this work is an important factor in the left and right dust catcher functions and operating conditions.

9. Treat the air volume and whether the pressure of each test point is in line with the design.

When using mechanical products, you must know how to use instructions and pay attention to the items. Whether Central Machinery Industrial Dustrlector is running normally and directly affects whether it can be put into the pipeline. Otherwise, Central Machinery Industrial Dust Collector is likely to lose its utility quickly, and the trial movement of the device must be careful.

central machinery industrial dust collector https://www.kaisenfilter.com/Products