Ethernet cables are the key source to provide you with the fastest ethernet access. The ideal source to get seamlessly connected with your business's everyday tasks. But most of the time selecting the cable for installation is quite tough. Let me guide you through the process of deciding the right cable for your network.
In this guide, stay with me to know the enhanced version of Cat5 “Bulk Cat5e Cable” and Its speed characteristics along with some additional information that might help you decide the right cable choice. Let’s start with a brief introduction of ethernet cable.
Ethernet Cable – What Is It?
Ethernet cables are also known as network or LAN cables – it's a protocol used to connect with different hardware devices that need internet access. The internal structure of the cable is a twisted pair – 8 color-coded wires that twist together in a specific manner to form 4 twisted pairs. These twists help in maintaining signal integrity and minimizing the crosstalk and data attenuation.
The Cat5e cable is the most demanding cable in the industry due to its cost-effective solution. Besides this, the Cat5e is more advanced than its predecessors – Cat5. Let me unwrap the most important information regarding the enhanced category 5 cable.
What Is a Bulk Cat5e Cable?
In Cat5e “e” is derived as enhanced category cable 5 – with gigabit speed and better bandwidth to support your network specifications. If we delve into depth features the Cat5e cable 1000ft delivers 100 Mbps speed over 100 meters whereas, if the distance of the cable is reduced to 50 meters you will get gigabit speed – 1000 Mbps or 1 Gbit/s. The cable delivers a maximum speed of approximately 350 MHz.
What’s new about Cat5e 1000ft cable is its cost-effective nature and an ideal investment for your networking infrastructure. You can easily get the cable online or at your nearest hardware store.
Note: Cat5e cable is not for longer runs for longer runs you need to buy Cat6 cable either shielded or unshielded.
Bulk Cat5e Cable – Conductor
The internal 8 wires of cat5e plenum cable are made up of 100% pure copper conductor for lightning-fast transmission as well as performance. These wires are very thin and covered in an FEP-rated plenum jacket to protect the cable from harsh temperatures and to avoid any fire incident.
Most commonly there are two types of Cat5e conductors – solid copper and bare copper conductor. Both cables show the finest results in terms of speed and connectivity.
Advantages Of Cat5e Plenum 1000ft
Bulk cat5e has some major advantages that make this cable choice for every cable installer. Here are the characteristics of cat5e cable.
- Transmission speed
- Cat5e 1000ft cable provides gigabit speed (1000 Mbps) to support fast data transfer rate with minimum data loss due to twisted pairs.
- Bandwidth
- Cat5e plenum cable has an improved bandwidth of 350 MHz to support fast ethernet applications. The diameter of the cable is 24 AWG (American Wire Gauge).
- Cost Effective
- The cable will just meet the requirement of your networking needs by investing a few bucks. Ready to use for gaming purposes as well.
- STP or UTP
- There are chances that your environment has sufficient external noise that could affect your speed and performance. Always use STP cables if you do not want to compromise transmission speed.
- Fire Resistant Plenum Jacket
- Another feature of cat5e is its outer plenum jacket to use for plenum spaces of the building to meet fire safety standards.
- Reliable
- Cat5e 1000ft cable is more reliable and durable if installed properly within the building. The cable lifespan is around 5 to 8 years.
Types Of Cat5e Ethernet Cable
Cat5e has basically two variants – shielded with the acronym STP (Shielded Twisted Pair) and unshielded UTP (Unshielded Twisted Pair). First, an unshielded cat5e cable is a general cable without any additional insulation layer. UTP cables show less attenuation and crosstalk resistance but fail to do so if installed in a complex wiring structure.
On the other hand, STP cable is thick, and bulkier due to the presence of internal shielding – the insulation layer is either foil or braided to prevent the cable from EMI or RFI. These cables show maximum protection against external noise. Moreover, shielding cables provide a more secure transmission speed without signal interference.
What Is Plenum-Rated Cat5E Cable?
After speed specs, one more thing you should know about the Cat5e plenum 1000ft cable is the importance of its outer jacket – plenum. The Cat5e plenum cable is made up of FEP-rated flame-resistant material to protect your cable in case of a fire incident. The LSZH plenum jacket in case of fire emits non-toxic smoke which is a plus to this jacket. The plenum spaces in the building include air ducts, ventilation, HVAC systems, etc.
The main reason that only plenum cables can be used in plenum spaces is due to high airflow and maximum oxygen presence. In that case, the chance of fire ignition is quite high.
According to NEC (National Electric Code) while deploying ethernet cable in your building it should meet the fire safety standards set by the industry to avoid catastrophic incidents.
Moreover, Cat5e plenum cable is UV-resistant and can withstand harsh climate temperatures. The temperature ranges from -20 degrees to 60 degrees.
Note: Plenum cable can bear a specific temperature range and can be installed in industrial setups due to its high fire resistance capacity.
Identification Of Cat5e Plenum 1000ft Cable
Most manufacturers use different acronyms for plenum cable printed on the cable like (UTP Cat5e 350 MHz CMP) Here CMP is related to plenum (Communication Multipurpose Plenum). Moreover, Cat5e plenum copper 1000ft is a bit thicker than the riser cable so you can identify the plenum jacket easily.
There are other acronyms used for plenum like PL, PLM, CMP, etc. If you are still confused about the plenum jacket you can contact our customer support team to guide you to the best of their knowledge.
Accessories To Install Bulk Cat5e Cable
For installation of Cat5e plenum copper 1000ft ethernet cable there are few tools required for proper installation of the cable. First, identify the location for deploying the cable (Horizontal or vertical) always remember horizontal spaces are plenum-rated spaces in the building.
Cat5e cable 1000ft installation requires scissors, cable cutters, crimping tools, RJ45 connectors for terminating the cable, and last but not least cable tester to verify that the cable is working fine.
Final Thought
Overall bulk Cat5e cable is an ideal addition to your network setup. It provides you with gigabit speed with high bandwidth. The cat5e plenum 1000ft cable features a CMP jacket – which restricts fire hazards.
If you are looking for quality cable look no further and visit our huge range of ethernet cables and accessories that will hike your interest in buying ethernet cable. If you are stuck in making a decision our dedicated customer support team has covered your back.
